RAM Long Upper Tube 8 Inch

Nine inch pole with square base.

This is a twelve inch pole with a swing arm connection point to attach to...

The RAM upper Tele-Pole, 4" male pole, contains a swing arm...

The RAM-PF-585-24 is a 24" flexible metal pipe, with...

A chrome plated arm with a socket at each end to hold a 1" diameter ball....

Aluminium tube rod designed to hold your fishing rod by its handle.

Replacement rubber cap for RAM Tube components.

The double swing arm for the RAM Vehicle Mounts includes two (2)...

The RAM-101U-D consists of a long double socket arm and two 2.5"...

The RAM-B-101U-C consists of a LONG double socket arm and...

Replacement long clamp arm (dist between centres 210mm) for 38mm (1.1...

The RAM-to-Garmin double ball LONG arm will attach to the...

Universal clamped mounting with rectangular and round plates, longer clamp...

D-series double clamp, longer than standard clamp, for 55mm ball systems.

Many devices offer a T-Slot attachment point on the back enabling the user...

Uses clutch or brake handle mounting as an adapter, to mount other RAM...

An 18 inch pole with square base, designed to attach to most RAM-VB...

The RAM POD III includes three aluminum flex legs with a black...

Rectangular plate base 2 x 4 inches with a 1.5 inch ball.

Marine grade aluminium plate with a 1.5" C sized ball.

Plastic cup holder with blue rubber inside insulator.

The RAM-PF-585-6 is a 6" flexible metal pipe, with composite...

Plate with octagon neck. Use with RAP-271-BCU Belt Clip.

Ram 1.5" ball with 2.5" base with standard AMPS hole pattern,...

Designed for hobbie kayaks with sail mount ports measuring 7/8 to 1 inch...

This 6 inch flexible arm has a plastic diamond plate at one end, and a...

Almost everyone wants a tablet pc so don't let someone get yours for free....

Universal clamp base with a one inch ball. Perfect mounting system for...

Aluminum 1.5'' Ball on a 2'' x 2'' plate.

RAM Mount Aluminum 0.31-24 Female Thread on 1 inch Ball....

Replacement black tubing to suit the 18" aluminium flex rod...

a 3.0" double socket plastic arm, with a 1" socket at either end.

With the RAM Tough-Track, flat surface mounting possibilities are...

The rust proof metal u-bolt replacement accommodates rails in diameter from 1"...

100mm Suction cup for windscreen, with 25mm (1") ball to suit Ram...

Marine grade aluminium 2.5" diameter base with a quarter inch NPT...

Double 1" ball base with 0.25" NPT hole

The RAM-B-202U-GA62U consists of a 1" diameter rubber ball...

90mm square plate, VESA hole set 75mm, with standard size ball...

The RAP-B-230-1U consists of dual 1" balls, with a swivel...

The RAM-B-247U-2 consists of a 3" maximum width clamp base...

The RAM-247U-3 is a clamp base with 1.5" rubber ball that...

The RAP-BB-230-24-201 is a High Strength Composite...

A 38mm ball, with 1/4" standard camera adaptor thread (20 TPI).

45cm long aluminium pipe with male thread at either end. The pipe is...

RAM 2 - 2.5" Diameter rail base with 1.5" ball size.

A 2.25" Rubber ball with two u-bolts for 0.75" - 1.25"...

B size single 1" ball with 0.25" NPT hole

RAM 18" Long Extension Pole with (2 qty) 1" Single Open...

1.5" inch ball wedge mount to accommodate holes from 0.75" to...

2.1/2" base with female 1/2" threaded hole set at 45 deg. Takes...

150mm Pivoted arm to extend Ram Mounts. Cast-aluminium. Normally used...

1" Rubber Ball with stainless steel U-bolt for 1.25" diameters.

30.5cm flexible arm with rubber ball (RAM-B-218-1) and...

Vertical 12" Swing Arm Mount with Swivel Socket Arm

Locking the knob will disengage the screwing mechanism, so that once the...

2" by 1.5" metal plate, with a 1 1/2" rubber ball.

Aluminium rail strap holder with a 1.5" rubber ball.