RAM Arm Base with Double U-Bolt

The RAM-235-1U consists of a double u-bolt base with 1.5"...

The RAM combination handlebar and brake/clutch reservoir base provides...

A 1.5" ball, with two steel u-bolts which can expand to 1.9cm -...

The RAM-B-132RU consists of a zinc-coated U-bolt base, medium...

Ball with U-bolts to suit Ram Mounting systems. Cast-aluminium.

Zinc coated u-bolt with RAM universal diamond plate. Will fit a...

Double 1" ball base with 0.25" NPT hole

The RAP-B-200-2U consists of a double 1" diameter open ball...

An aluminium double arm with rotating end and AMPS plate.

As big as they come. 26.2cm long E-sized standard arm.

RAM 12.7cm long E-sized short arm.

This double socket plastic arm accommodates 2 1.0" diameter balls, and...

C-size double swing arm with swivel socket mount. With its rotating...

D-series double clamp, longer than standard clamp, for 55mm ball systems.

Short double socket for D-series 55mm ball.

Double socket arm with metal tightening knob, which has a socket at either...

This RAM arm has a socket at each end for a 1.5" ball.

The RAP-BB-230-24-201 is a High Strength Composite...

The vertical base supplied with all RAM-109V systems.

RAM has paired a B-sized 1" rubber ball base that accommodates bars 3...

Take your mobile entertainment on the road with the new RAM Torque...

Large C-sized Tough-Claw with standard double socket arm and circular...

150mm pivoted arm extending from a solid horizontally mounted base....

Standard Arm and Single Base

150mm pivoted arm extending from a solid vertically mounted base....

The rust proof metal u-bolt replacement accommodates rails in diameter from 1"...

The RAM Rail Base designed to sit at right angles to the mounting...

1" Rubber Ball with stainless steel U-bolt for 3/4" to 1" diameters.

The u-bolt is adjustable to fit diameters of 0.75" to 1.0". The rubber...

The RAM-B-149Z-UN7U consists of a zinc coated u-bolt base,...

1" Rubber Ball with chrome finish U-bolt for 3/4" to 1" diameters.

The RAM-B-235 dual U-Bolt rail mount has a 1.0'' diameter...

A 2.25" Rubber ball with two u-bolts for 0.75" - 1.25"...

Zinc Coated U-Bolt Hardware Pack, accommodates Rails 0.5" to...

1" Rubber Ball with stainless steel U-bolt for 1.25" diameters.

RAM Mount Aluminum 1.5 inch Double or Triple Ball on 2.5 inch...

Two round plates, one with a male camera 1/4" inch thread. Standard...

Double socket arm mount with two round bases to suit the Garmin...

The RAM Spine Clip holder is a mount adapter that easily clips into...

Allows you to connect two sockets together, to give you just that extra...

Double adapter 25mm Balls to suit any RAM-B-201, 201A,...

Two D-sized (2.25") balls connected together.

The RAP-B-230-1U consists of dual 1" balls, with a swivel...

Double adapter 25mm Balls and round mount plate. Suits any...

The RAM-B-201-SU consists of a 1" dia. ball compatible...

The RAM-B-174-UN7U consists of hardware for mounting to...

RAM Rail Base with 1" Ball and (2 qty) 1/4"-20 X 3/8"...

The RAP-B-224-2 RAM Mount Cone Locking 2.75 inch...

A rail mount designed to fit rails up to approx 2.6cm in diameter. The...

The RAP-B-378U consists of a 2.5 inch composite base that...

Universal clamp base with a one inch ball. Perfect mounting system for...

Round plate and 3/8 male thread, 38mm rubberized ball, for ball and...

Fits on many handlebar pinchbolts with a washer (base is 5mm thick). It...

A 2.25" Rubber ball with 60mm (2 7/16") diameter base with 4...

This U-Channel clamp base is designed to fit to the edge of a flat surface...

Aluminium 2.5" base with a 0.5" NPT female thread. Can connect...

RAM Mount Aluminum Rectangular 1.5 x 2 inch Plate with 1.0 inch...

RAM 1" BASE FOR HUMMINBIRD & APELCO 97...

V-base with 1" ball and screw up hose straps

The RAM Bond-A-Base is a flexible PVC mounting pad which...