RAM 2" x 1.5" Base with 1.5" Ball

Aluminum 1.5'' Ball on a 2'' x 2'' plate.

RAM Mount Aluminum 1.5 inch Ball on 1.5 x 3 inch Plate.

The RAM-235-1U consists of a double u-bolt base with 1.5"...

Ram 1.5" ball with 2.5" base with standard AMPS hole pattern,...

RAM Mount Aluminum Rectangular 1.5 x 2 inch Plate with 1.0 inch...

Marine grade aluminium plate with a 1.5" C sized ball.

Many devices offer a T-Slot attachment point on the back enabling the user...

Allows you to connect two sockets together, to give you just that extra...

90mm square plate, VESA hole set 75mm, with standard size ball...

The u-bolt is adjustable to fit diameters of 0.75" to 1.0". The rubber...

Aluminium strap with C-sized 1.5 inch ball.

Locking the knob will disengage the screwing mechanism, so that once the...

Aluminium rail strap holder with a 1.5" rubber ball.

Aluminium rail clamp mount with 1.5" ball. 1.25" to 1.88" diameter.

A 1.5" ball, with two steel u-bolts which can expand to 1.9cm -...

Designed for hobbie kayaks with sail mount ports measuring 7/8 to 1 inch...

Double 1" ball base with 0.25" NPT hole

Fits on many handlebar pinchbolts with a washer (base is 5mm thick). It...

Universal clamp base with a one inch ball. Perfect mounting system for...

A 2.25" Rubber ball with 60mm (2 7/16") diameter base with 4...

V-base with 1" ball and screw up hose straps

The RAM Torque rail mounting base securely attaches to bars 1.5" to...

RAM Mount Aluminum Rectangular 1.5 x 2.5 inch Plate with 1.0...

The RAM® Torque rail mounting base securely attaches to bars 1.5" to...

Rectangular plate base 2 x 4 inches with a 1.5 inch ball.

Plate with octagon neck. Use with RAP-271-BCU Belt Clip.

Marine grade aluminium 2.5" diameter base with a quarter inch NPT...

The RAM-247U-5 is a clamp base with 1.5" rubber ball that...

2.1/2" base with female 1/2" threaded hole set at 45 deg. Takes...

150mm pivoted arm extending from a solid vertically mounted base....

An 18 inch pole with square base, designed to attach to most RAM-VB...

150mm pivoted arm extending from a solid horizontally mounted base....

The RAM-247U-3 is a clamp base with 1.5" rubber ball that...

Aluminium 2.5" base with a 0.5" NPT female thread. Can connect...

Nine inch pole with square base.

38mm (1.5") Ball to suit RAM 1.5" clamp system. With female...

1" Rubber Ball with stainless steel U-bolt for 1.25" diameters.

The RAM-B-202U-GA62U consists of a 1" diameter rubber ball...

The RAP-B-230-1U consists of dual 1" balls, with a swivel...

30.5cm flexible arm with rubber ball (RAM-B-218-1) and...

The RAM-B-247U-2 consists of a 3" maximum width clamp base...

The RAM-B-202U-GA63 consists of a 1" diameter rubber ball,...

Uses clutch or brake handle mounting as an adapter, to mount other RAM...

Integrate Quad Lock with your existing motorcycle RAM mount using the...

Plastic cup holder with blue rubber inside insulator.

A 2.25" Rubber ball with two u-bolts for 0.75" - 1.25"...

Diamond plate part with 1" ball mounting to suit the TOMTOM...

Uses any flat surface, to mount other RAM components on a motorcycles,...

With the Garmin spine mount adapter, you can make any Garmin handheld...

1.5" inch ball wedge mount to accommodate holes from 0.75" to...

RAM Mount Aluminum Square 2 x 2 inch Plate with 1.0 inch Ball.

A 38mm ball with 3/8" 16 TPI male thread.

RAM 2 - 2.5" Diameter rail base with 1.5" ball size.

B size single 1" ball with 0.25" NPT hole

A 38mm ball, with 1/4" standard camera adaptor thread (20 TPI).

A single D-sized ball, on a square 2 x 2 inch plate.

1" Rubber Ball with chrome finish U-bolt for 3/4" to 1" diameters.